Hi,

when I install the DW RC by remoteinstall, I get a popup with a question for permission to start the application on every startup of this machine.

This prevents all following applications in the autostart, etc.

The workaround is to log on as administrator to that machine and right click the file C:\Windows\dwcrs\dwcrst.exe and set the permission for remote-files.

After that, the popup dialog with the question to start does no longer come up. (Oh and no, you have to log on as administrator, Microsoft is not able to change some things by a runas.)

But isn't there a way to surpress this right before the installationprocess?

There should be a way to give the permission on the install routine, shouldn't it?

Note: This is a topic brought over from DameWare Forums which has been closed. If you wish to engage in this discussion, just comment here.

Damware Remote on Windows PE?
by guy on Wed Feb 24, 2010 5:01 am

Hello,
Over the last few days I have been trying to get Windows PE to run Dameware.
What I have done is install the client onto a base PC, copy off the drivers I think are required (below) copying them to PE in X:\Windows\System32\ and then started DWRCS.exe - install /-service.

DWRCK.dll
DWRCS.exe
DWRCSET.dll
DWRCSI.dll
DWRCST.exe

I can ping the PC with PE (firewall switched off on both computers) and it authenticates and it even tells me the keyboard set is in a different language but it then gets stuck on "initializing desktop, please wait"

Can anyone help me? I'm using Windows PE 3 with all packages installed WMI etc. 

Many Thanks!

Re: Damware Remote on Windows PE?
by guy on Wed Apr 07, 2010 9:04 am

Bump...
Anyone have any ideas at all?

Re: Damware Remote on Windows PE?
by dcolpitts on Sun Apr 25, 2010 8:15 am

You didn't make mention of whether you are using x86 or x64 of WinPE... As of 6.8.1.4, the Dameware client was 32 bit only, so it wouldn't work with the x64 builds of WinPE. You may want to have a look at my posting here: http://forums.dameware.com/viewtopic.php?f=9&t=469

Also, since my last posting there, I found a somewhat simplier way to do things. Use the "DameWare Mini Remote Package Builder" to build an MSI, including configuration for Proprietary Challenge/Response, then extract that resulting .MSI with 7-Zip, and then within there, you will find a Cabs.dwrcs.cab. Extract that to your WinPE's \windows\system32 folder. That contains everything you need to run the client. Lastly, you will need to add a line to run "\windows\system32\DWRCS.EXE -install" within WPEINIT.

And just to be perfectly clear, I have not tried what I suggested above yet with WinPE 3, but I believe it should work.

dcc

Re: Damware Remote on Windows PE?
by rotot on Tue Apr 27, 2010 7:47 am

mmm...thanks for info

Re: Damware Remote on Windows PE?
by guy on Tue May 11, 2010 11:31 am

Sorry I was not clear and the delay.
my WinPE is currently 32bit.
I will test the install and let you know.

Re: Damware Remote on Windows PE?
by guy on Tue May 11, 2010 11:55 am

Thanks for your help so far!

Ok so I've done the follows:
Made a Windows Vista (32-bit) MSI with proprietary challenge/responce
Build the MSI
Extracted the MSI
Extracted Cabs.dwrcs.cab
Copyed the files: DWRCK.dll,DWRCS.exe,dwrcs.ini,DWRCSET.dll ,DWRCSh32.dlx,DWRCSh64.dlx,DWRCSI.dll,DWRCST.exe to X:\Windows\System32\ (X: being the standard drive letter PE sets)
Launched "X:\windows\system32\DWRCS.EXE -install"
It connects to the point saying Initalzing Desktop. Please wait...." and thats it nothing more I have turned off the mirror driver as well.

Any Ideas

Re: Damware Remote on Windows PE?
by dcolpitts on Tue May 11, 2010 12:37 pm

Not right off... I just tested it and get the same result you do. I fear you may SOL unless someone from Dameware wishes to point us in the correct direction.

dcc

Re: Damware Remote on Windows PE?
by guy on Wed May 12, 2010 4:48 am

Thanks for that...
At least I know I'm not being stupid now if someone else can replicate the issue I have.
It's as shame as I'm sure it's something fairly simple to fix as it's -almost- working....
Anyone from Dameware - Are you reading ?

Re: Damware Remote on Windows PE?
by guy on Wed May 12, 2010 7:56 am
Just to update further.... It seems that becuase Dameware required Terminal Services this will never work....
PE is just too stripped down to allow anything like this to work 
I guess it's time to look at an open source application for PE.... 

Re: Damware Remote on Windows PE?
by dcolpitts on Wed May 12, 2010 9:38 am

I'm not sure that is the issue... My BartPE (with Sherypa's XPE based on Windows 2003 SP1) works fine with Dameware, and it does not have RDP support in it.

Re: Damware Remote on Windows PE?
by guy on Thu May 13, 2010 8:13 am

in your BartPE if you type Net Start do you have Terminal Services running?!

Re: Damware Remote on Windows PE?
by dcolpitts on Thu May 13, 2010 8:50 am

Nope. These Windows services are started:
Audio Windows
DameWare Mini Remote Control
DCOM Services
DHCP Client
EventLog
Network Connections
Network Location Awareness (NLA)
Plug and Play
Protected Storage
Remote Procedure Call (RPC)
Security Accounts Manager
TCP/IP NetBIOS Helper
Workstation

dcc

Re: Damware Remote on Windows PE?
by nhelp4k6 on Wed Jun 02, 2010 12:51 pm

Read both the WAIK documentation (msdn or technet) and the Technet forums; PE stands for Preinstallation Environment - as in completing tasks so that the *full* system can be loaded. If you are interested in a windows "slackware" style session there is a convuluted method of building XPe to CD size. Disadvantages of the XPe method are several, to begin with it's a lot of work for limited (based on your description) payback, targeting tends to be specific to machine hw config, and you need the target designer - last I checked it ran ~$1K.
Better question, why do you want to use dwmrc inside PE/slackware?

Re: Damware Remote on Windows PE?
by guy on Tue Aug 10, 2010 5:55 am

The reason for wanting Dameware in PE is for remote rebuilding/repair.
PCAnywhere has "thin host" which works but it's very expensive and not really helpful as we have Dameware in many places.
The idea is that you boot into PE (remotely) connect into the PC with Dameware start the process you need i.e. A build and off you go.

HI. there is any option in Dameware mini remote control to perform operation on other machine in invisible mode(without his knowledge)?

We have had to replace a few computers in our network over the last month or so as they have died out. We've replaced them with a different brand/model computer however we named the computer the same name. We deleted the old name out of AD, added the new computer to the domain with the same name as the old computer and let everything sync. However when attempting to connect to DameWare via the PC name it doesn't connect and errors out. However if I go into DHCP and find the IP address(as I can't ping the computer through dameware either) and create a "favorite" machine with that IP it connects with no issue.

How do I get dameware to update the named pc to the new system so it will connect that way and I can stop creating all of these "favorite" machines.

Note: This is a topic brought over from DameWare Forums which has been closed. If you wish to engage in this discussion, just comment here.

Disable automatic saved hosts
by boucherjeanfra on Fri Jan 21, 2011 2:06 pm

Hi,

In the version 7 of Mini-Control, is it possible to disable the "automatic" save to a new host ?
I verified twice in the settings but found nothing.

Thanks for your help,

Cheers,

Re: Disable automatic saved hosts
by bryan on Mon Jan 24, 2011 4:01 pm

Hi boucherjeanfra,

Anytime you start typing while the Host field is selected the New Host dialog will be displayed, to allow you to create a new Saved Host entry. If you're trying to modify an existing entry, select the desired entry in the Saved Host List, then right-click on this entry and select Rename Host. This will allow you to modify the existing entry without creating a new one.

I hope this helps.

Best Regards,
Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com

Re: Disable automatic saved hosts
by Siggi on Wed Jan 26, 2011 5:18 am

Hello there,

I just installed the MRC7 and have the same problem as boucherjeanfra. I also want to get the "automatic-saving-a-new-host" feature disabled because in the past I always connected to a remote host by only typing in the adress. The hosts don't need to be saved. It's faster for me than selecting the host from a list.

Hope you got what I mean.

Re: Disable automatic saved hosts
by williaa on Wed Jan 26, 2011 4:01 pm

@Bryan, what we're wanting to know is if there's any way to disable the New Host dialog from displaying anytime you start typing while the host field is selected. It's more convenient for this to not happen when using the Mini Remote Control.

Re: Disable automatic saved hosts
by bryan on Wed Jan 26, 2011 5:36 pm

Thanks everyone for your feedback.

Presently there is no way to turn this functionality off. MRC v7 will automatically create a new Host Entry when you start typing, whereas v6 would create a (Temporary) entry. (Temporary) entries no longer exist in v7.

Kind Regards,
Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com

Re: Disable automatic saved hosts
by Siggi on Thu Jan 27, 2011 3:12 am

Perhaps, it could be an idea to add a "Quick connect" adressbar to the next version of MRC for those who want to connect in that specific way?

Re: Disable automatic saved hosts
by bryan on Mon Jan 31, 2011 5:35 pm

Hi Everyone,

Just FYI, we're looking into adding some new functionality in the next release of the software, which will be 7.1.0.0, where you can turn off the Host Entry "Auto Save" feature. I will udpdate everyone as more information becomes available.

Best Regards,
Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com
 

Re: Disable automatic saved hosts
by KCarney on Tue Feb 08, 2011 2:14 pm

So has it been added?

Re: Disable automatic saved hosts
by bryan on Tue Feb 08, 2011 3:17 pm

The new "Disable Auto Save" functionality was implemented in v7.1.0.0. On the MRC Remote Connect dialog (not from the main menu) first select the Edit menu, then enable the "DisableAuto Save" setting. This will instruct the software not to display the "new host" dialog when you modify the HostName/IP-Address of an existing Host Entry. Instead, a new temporary entry will be created, designated by a red circle with an x in the icon's lower right corner. If you close the MRC Remote Connect dialog, or simply Connect then Disconnect, this temporary entry will now be gone.

I hope this helps.

Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com
 

Re: Disable automatic saved hosts
by KCarney on Tue Feb 08, 2011 4:57 pm

When "Disable Auto Save" option is enabled "reconnect" no longer functions properly, it now displays the last computer I connected to when the option was disabled. Please fix this

Re: Disable automatic saved hosts
by bryan on Tue Feb 08, 2011 5:35 pm

This is exactly how the reconnect option is designed to function, and this is the same way it worked in v6.x as well. By default only Saved Host entries are added to the Reconnect list, because we only have settings stored for the entries in your Saved Host list. There are no settings stored for any type of "temporary" entries, therefore, they are not added to the Reconnect list. If you need custom settings stored for any remote machine, then you must save it to your Saved Host List.

With that being said, there is a setting on the Local Global Options dialog called "Add only savedhost entries to Reconnect list". If you choose to disable this setting, then any machine you connect to will be added to the Reconnect list. However, since no custom settings exist for any of these non-saved machines, you may not be able to successfully reconnect.

If all of these non-saved machines use the same default credentials & settings, then you should be able to add these default credentials and settings to the Default Host Properties dialog. These Default Host settings are used when you create a new Host Entry. However, if you highlight an existing Saved Host Entry and then change the HostName or Ip-Address, then the settings from this Original Host Entry (not default) are used to create your new Temporary entry.

I hope this helps.

Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com

Re: Disable automatic saved hosts
by KCarney on Wed Feb 09, 2011 2:39 pm

and this is the same way it worked in v6.x as well.

No, it didn't. It randomly picked a host that was connected to by any number of open DMRC windows, it was a little annoying at times but worked. This new version seems a lot cleaner

If you need custom settings stored for any remote machine, then you must save it to yourSaved Host List.

That makes sense.

With that being said, there is a setting on the Local Global Options dialog called "Add onlysaved host entries to Reconnect list". If you choose to disable this setting, then any machine you connect to will be added to the Reconnect list. However, since no custom settings exist for any of these non-saved machines, you may not be able to successfully reconnect.

That is exactly how it worked in 6x, I will give that a try. Thanks for explaining! 

Re: Disable automatic saved hosts
by KCarney on Mon Feb 14, 2011 1:24 pm

Works great now in 7.2.0.0, thank you!

Re: Disable automatic saved hosts
by KCarney on Fri Feb 18, 2011 11:10 am

Correction, this works *sometimes*. After a week of using it disconnecting from a host and attempting to reconnect results in blanked out connection options. I have to enter the previous host manually to reconnect.

Re: Disable automatic saved hosts
by bryan on Fri Feb 18, 2011 3:02 pm

Just because you connected the first time doesn't mean you can immediately Reconnect to any machine when it's not saved in the Saved Host List. This is exactly why we did away with this feature initially for version 7.x, for all machines not saved to the Saved Host List.

When a machine is saved in the Saved Host List, we have all the settings necessary to Reconnect (UserID, Password, Port, etc...). However, when a machine is not saved to the SavedHost List, there are no settings we can use to Reconnect. Once you click on Disconnect, all those settings are now gone. We no longer have any settings for this machine. Therefore, by design, they will be blank settings exactly as you mentioned previously when you try to Reconnect, and the connection will fail.

The only way "Reconnecting" to a machine that's not explicitly saved to the Saved Host List will ever work would be if you enter the correct settings (UserID, PW, Port, etc..) under the Default Host Properties dialog (i.e. View / Default Host Properties from the main menu). Just keep in mind that these default settings would be the same settings used for all "Reconnect" attempts when a machine is not explicitly saved to the Saved Host List.

I hope this helps.

Best Regards,
Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com

Re: Disable automatic saved hosts
by KCarney on Mon Feb 21, 2011 9:18 am

When a machine is saved in the Saved Host List, we have all the settings necessary to Reconnect (UserID, Password, Port, etc...). However, when a machine is not saved to theSaved Host List, there are no settings we can use to Reconnect. Once you click on Disconnect, all those settings are now gone. We no longer have any settings for this machine. Therefore, by design, they will be blank settings exactly as you mentioned previously when you try to Reconnect, and the connection will fail.

I would agree with you, however, I have set my default settings to "NT Challenge/Response" and "Use Current Logon Credentials" selected. *Sometimes* when I launch DMRC all settings are blank and "Encrypted Windows Logon" is selected with no machine name as host. So as you can see I don't need any saved settings, I don't want hosts automatically saved, and this should be working but is not.

Re: Disable automatic saved hosts
by bryan on Mon Feb 21, 2011 2:04 pm

Based upon the screen shots you sent to support, the software is working exatly as it should.

In your screen shot there is no Host Entry selected, instead, the Root folder (i.e. Saved Host List) was selected. When MRC starts up it will try to locate and highlight the last entry you connected to. However, when that entry cannot be found (i.e. it was not saved), then the root folder is selected. Therefore, by design, since a folder is currently selected and not a host entry, MRC will not go through all the work of pulling the default host properties just to populate the RC dialog. So the fact that you see Encrypted Windows Logon shown in the RC dialog while a folder is selected when you’ve selected NT Challenge/Response as default doesn’t mean there is an issue with the software.

Also, the fact that you say this only happens *sometimes* means that these other times when this does not happen, there must be an existing host entry already with this same name. So when you click on reconnect, those settings from the existing entry will be used and not default settings.

I hope this helps.

Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com
 

Re: Disable automatic saved hosts
by TrafficTech on Fri Mar 04, 2011 11:09 am

I have a few comments to make on the Saved Host List of version 7.3.0. I currently have my settings to "Disable Auto Save" and I have disabled the "Add Only Saved Host Entries to Reconnect List". I seem to have found a little bug in the process.

1) If I enter a new temporary entry, it indeed populates in the reconnect list. I can go back and connect to another temporary address and that also goes into the reconnect list. I notice the reconnect list has only unique entries (If I reconnect to a previous entry using the Connect button and not the reconnect button. However, if I use the reconnect drop-down, the entries are no longer unique. Furthermore, when I close and reopen the application, my reconnect entries have vanished, the button is grayed out. This happens every time I use the reconnect button.

2) If I leave the Auto Save feature on, I would like to have an option to have unique entries in the Host List. The list can get long and I don't necessarily want to go through it every time, but I do not want to duplicate my entries either

3) I can understand that if I select a Saved Host entry and decide afterwards I want to connect to a temporary host instead, the Alias from the previous entry is still shown. What I don't like is that if I inadvertently left the alias there and connected, the entry listed in the reconnect drop down shows as ALIAS (HOST). I am more interested in the host and don't really want to see the alias entry (especially since I mistakenly left it in during the temporary entry previously).

David M
Systems Admin
Traffic Tech

Re: Disable automatic saved hosts
by bryan on Thu Mar 10, 2011 11:10 am

Hi David,

Thanks very much for all the info you provided. This should be now be resolved in v7.4.

Your feedback is appreciated.

Bryan Brinkman
Support Engineer
DameWare Development, LLC.
http://www.dameware.com

Dameware install in linux? If not, have hold map for new version for this system operation. ?

Hello everybody,

I have in my Dameware Remote Support some Windows 7 clients. If i open the Task Schedueler it won't show me the tasks which are already running on my client.

If I create a task over Dameware it will be shown in Dameware in the Task and Job scheduler and on the client. But it won't show me the already existing tasks on the client neither the ones I create new on the client.
Can someone help how I can see the tasks in Dameware ?

Hello DameWare users!

Here is a brief guide to shows how to gather information from computers in your network or domain using the DameWare Exporter tool included with DameWare Remote Support.

Objectives:

1- Get "Installed Software" data from computers in my network to create a report.

2- Get the information in a CSV file format so it can be easily imported into an Excel spreadsheet

3- Get the information from several computers in a single file

First, you have to launch the tool. You can find it in the same location as the main DameWare Remote Support application (Start > Programs > SolarWinds > DameWare Remote Support 9.0 > DameWare Exporter). You can recognize it easily by the colors in the icon (blue/yellow) :

In the Exporter tool you must change the settings so the files created have the CSV format instead of XML (which is used by default). In this example we want to get "Standard" information (which basically means we are pulling data from the machine instead of Active Directory) so that's the tab we need to modify:

NOTE: The "Single File" option here indicates that a single file will be made per-machine including all properties selected. It DOES NOT mean a single file will include each computer.

Once the output file type is set, do the following:

1- Under "Task List" uncheck everything except for Standard Properties - Software.

2- Click the "Add Machines" button to include the computers you want to survey.

3- Make sure all the systems in the "Computer List" are checked

4 - Click on "Start Exporting"

After this you will end up with a .csv file for each computer you surveyed. Unfortunately, DameWare Exporter doesn't feature an option to generate a single file for all the computers. However,  CSV files are easily merged using the Windows copy command. Place all the files in the same folder and run the following command in the Command Prompt:

copy *.csv allcomputers.csv

This line will create a new file, "allcomputers.csv" (you may use the name of your choice) that will be a merging of all .csv files found in that folder.

Hello everyone, can someone tell me where Exporter scan for software. regedit, add and remove, install path and so on

Solarwind's whole licensing procedure is terrible.  Everything was running just fine with Dameware Remote Support (which includes Dameware Mini Remote Control) until today when I received a "License Expired" popup when launching DMRC.  I tried to re-activate and  I get a "License Activation" failure whether I use the local license manager or online activation.  Our maintenance was up a couple of years ago, but we only have one client on Dameware and they are on the same version that we are on, so there is clearly no need to upgrade to version 12 since it would force them to also upgrade to version 12.  I have tried uninstalling and reinstalling the same version 11 that was available when the maintenance was in effect.  I've even tried regenerating the license file using my unique machine ID and it still fails.  Anyone have any ideas.

Hello everybody,

We have several different versions of Dameware and are running into some issues using Dameware (f.ex. connecting with MRC to Windows 10 machines). My question is: from what version is Windows 10 supported by Dameware?

Thanks for your time,

Chris

Hi,

i'm currently testing dameware central as my main remote system.

I was happy to see that you guys now support remote hosts through a secured internet proxy i can host on my end ! Specially with the unattended access with version 12

After setting up everything in my test environment, and testing the addition of remote hosts from home and multiple sites, i was a bit disappointed that the file transfer was simply... not available ? Did i miss something ? did i forget to open up a port ?

Or is this really not available through internet proxy connection !? If so, is this planned in a very near future version !?

I am currently evaluating where dameware is now vs TeamViewer when it comes to behind NAT connection, ease of use for the staff, pricing and features...

Now although i'm amazed where dameware is now compared to previous version (I have been using dameware since version 4 on internal network at one of my customer's site). I cannot tell my staff that from now on, we'll have to go through more steps (like an FTP or Cloud storage...) to transfer files on the remote system as opposed to a simple, drag and drop

When our IT remotes to our Windows PCs they leave behind the DameWare Development Mirror Driver. This driver causes problems with at least one software application, and so it needs to be removed after the remote IT session is ended. How can this be automated?

I have been running on Windows 10 for quite a while (since last fall) and using Dameware Remote Support (11.0.0.1003).  Recently I upgraded to the latest W10 version (1607).  Unfortunately, this broke the remote clipboard.  I have a co-worker who had the same experience.  The only difference between the two was that his mini-remote worked fine, then he upgraded to the "full-version" (as we call it).

Any ideas about how to fix this?  I would have thought a reinstall of the application, but with the fresh install that was broken that didn't seem like a solution.  Any thoughts?

Let the community know how impressed you are with DameWare Remote Support and earn a $25 Amazon gift card!  Simply post your review in Spread The Word with the questions answered below:

1.       What was life like before using SolarWinds? (Include what you were using and why you decided it was time for a change)
2.        Which SolarWinds product(s) saved your bacon?
3.        Did you consider other options, and why did you choose SolarWinds?
4.       How has life been since you've rolled out SolarWinds in your environment?

I’m thrilled to announce that Dameware 12.0 is now publicly available. In this release we focused all our efforts to finalise the remote support story with unattended over the internet sessions. Dameware now allows to assist remotely without presence of the end-user, who is not in the intranet but travelling. Technicians can now support end-user in company network as well as in Internet anytime.

This release brings several bigger and smaller improvements, so let me highlight a few of them:

• Over the Internet (OTI) unattended sessions for Dameware Centralized users
  • Allows you to remotely support users on the move, and assist remotely without the presence of the end user
  • Deploy agents with OTI unattended support to end-points
  • Manage agents for OTI unattended sessions to maintain high security and control
• Search Hosts in Mini Remote Control
• Support for Windows 10
• Ability to switch between the Standalone and Centralized versions without reinstallation
• And many other improvements and bug fixes

Dameware 12.0 is available for download on your customer portal for those customers under current maintenance.

If you are not a Dameware user yet, now go and download new version from www.dameware.com now!

Is anyone else having a difficult time getting DameWare to work over the internet?

Hello everybody,

I have in my Dameware Remote Support some Windows 7 clients. If i open the Task Schedueler it won't show me the tasks which are already running on my client.

If I create a task over Dameware it will be shown in Dameware in the Task and Job scheduler and on the client. But it won't show me the already existing tasks on the client neither the ones I create new on the client.
Can someone help how I can see the tasks in Dameware ?

Please note we have released Hotfix 1 for Dameware version 12.0. This hotfix is available on your customer portal.

Hotfix 1 addresses the following issues:

• ZDI-CAN-3125 vulnerability (Thanks to Andrea Micalizzi aka rgod, working with HP's Zero Day Initiative, for identifying this issue.)
• Upgrading MRC agents on remote machine failed.
• MRC was not able to connect to remote machine using "MRC Ping" feature.
• DRS Service installation failed in DRS.
• Event log does not show content in DRS.

Hotfix 1 requires SolarWinds DameWare Mini Remote Control version 12.0.0.509. Hotfix 1 can be applied to both 32-bit and 64-bit installations or SolarWinds DameWare Remote Support version 12.0.0.509.

You can find more details in README file included in hotfix.

Now go and download the hotfix now.

Until recently, DRS has been working great. Then I applied the November update to Windows 10 and no the Microsoft Windows Network no longer displays anything in DRS.  I am using version 12 with both hot patches applied.  Other than applying the update nothing had changed in our environment.  I can still find computers through the Active Directory, but it isn't nearly as convenient.  It is particularly troublesome to find the few computers that are not part of the domain.

Any suggestions for a fix?

Thanks,

Chris